Central Florida

Sheet Metal Fabrication for Orlando

Precision sheet metal fabrication for Orlando and Central Florida OEMs, built in Florida and shipped up the Turnpike. Enclosures, chassis, panels and welded frames from prototype through production.

Request a Quote

Central Florida|Built in Florida|AS9100 Rev D|ITAR Registered|Prototype to Production

Overview

A Florida Fabricator for Orlando OEMs

Orlando and the wider Central Florida region build simulation and training systems, defense electronics, entertainment technology, data infrastructure and aerospace hardware. Those products need accurate sheet metal: enclosures, racks, chassis, consoles and structural frames.

MJM Manufacturing is a Florida fabricator with the equipment and quality system those programs expect. Parts are built in Miami Gardens and shipped north to Orlando, Lake Mary, Sanford and the Space Coast. Keeping the work in Florida means the same time zone, short transit and a plant you can visit.

Many Central Florida customers start with a prototype or a small pilot run, then move the same part into repeat production without changing suppliers.

Industries

What Orlando Companies Send Us

Simulation and training

Consoles, racks, enclosures and structural frames for simulator and training system builders.

Defense electronics

Chassis, card cages, panels and enclosures built to drawing under AS9100 Rev D, with ITAR registered handling of controlled data.

Entertainment technology

Equipment housings, control cabinets and custom panels for show and attraction systems, built to the customer specification.

Data and communications

19-inch racks, cabinets, cable management and enclosures for data center and telecom equipment.

Capabilities

One Plant, Every Process

Process	What MJM runs
Laser cutting	five Amada lasers (one Ventis 4 kW fiber, three Ensis 3 kW fiber and one CO2) on 5 x 10 ft tables. Mild steel to 1 in., stainless and aluminum to 5/8 in., copper and brass to 3/8 in., laser tolerance of plus or minus 0.005 in.
Punching	Amada AE 2610NT CNC turret punch with a library of standard and forming tools for louvers, knockouts, embosses and countersinks.
Forming	Nine Amada press brakes, the largest 240 tons and 14 ft, plus three Knuth plate rollers to 7 ft.
Welding	Nine handheld fiber laser welders, certified TIG and MIG, and three Sciaky spot welders.
Hardware and machining	Four Haeger insertion presses and a Mazak machining center for holes, taps and features on fabricated parts.
Inspection	Amada Fabri-Vision optical inspection and a Keyence XM-5000 CMM under an AS9100 Rev D and ISO 9001:2015 quality system.

Every job runs in one 44,000 sq ft, fully air conditioned plant, so cutting, forming, welding, hardware and inspection stay under one roof and one quality system.

How It Works

Ordering From Orlando

Send STEP files and PDF drawings to sales@mjmmfg.com. Quotes come back in 24 to 48 hours.
Orders ship from Miami Gardens, F.O.B. Miami, by truck or by your preferred carrier.
Typical lead time is 3 to 4 weeks, with expedites on request.
Material is sourced in the United States with mill certifications.
First article reports and inspection data can be sent ahead of the shipment when the order requires them.

FAQ

Orlando Sheet Metal Fabrication FAQ

Does MJM Manufacturing ship to Orlando?

Yes. MJM ships to Orlando and all of Central Florida from its plant in Miami Gardens, F.O.B. Miami, and ships across the United States.

Why use a South Florida fabricator for an Orlando project?

Capacity and certification. MJM runs five Amada lasers and nine press brakes under an AS9100 Rev D and ISO 9001:2015 quality system, and stays inside Florida for short transit and easy visits.

Can you build complete enclosures and racks?

Yes. MJM cuts, forms, welds, installs hardware and assembles complete enclosures, racks and chassis, and delivers them finished.

Do you handle ITAR controlled drawings?

Yes. MJM is registered with the U.S. State Department under ITAR and handles controlled technical data accordingly.

Is there a minimum order quantity?

No. MJM builds single prototypes, pilot runs and production quantities.

How long does a quote take?

Most quotes are returned in 24 to 48 hours.

Custom Metal Fabrication: the full shop under one roof.
Laser Cutting Services: five Amada lasers, mild steel to 1 in., stainless and aluminum to 5/8 in.
Precision Forming and Press Brake: nine Amada press brakes to 240 tons and 14 ft.
Welding Services: fiber laser, TIG, MIG and spot welding to AWS D17.1, D1.1, D1.2 and D9.1M.
Custom Sheet Metal Enclosures: complete enclosures from one source.
Sheet Metal Prototyping: one piece to pilot runs with a DFM review.

Quote Your Orlando Project

STEP files and PDF drawings to sales@mjmmfg.com or (305) 620-2020. Quotes in 24 to 48 hours.

Request a Quote Contact Us

Ronald Travieso

Working with MJM Manufacturing has been one of the best vendor experiences I've had. The parts matched my samples perfectly, and even the packing was done with real care — clean, organized, and professional. Of all the vendors I've worked with, they're by far the most organized and quality-focused. Great communication from start to finish. Highly recommend them for custom fabrication work.

Robert Cooler

MJM is wonderful to deal with. They have worked diligently and have produced my projects thus far to the highest standards.

Israel Schechter

I have been ordering parts from MJM Manufacturing for many years, and they have consistently exceeded my expectations. Their quality, professionalism, and attention to detail are outstanding. Every order is handled efficiently, delivered on time, and manufactured to the highest standards. The team at MJM is knowledgeable, responsive, and always willing to go the extra mile to ensure customer satisfaction. It is rare to find a company that maintains such a high level of consistency over many years. I highly recommend MJM Manufacturing to anyone looking for a reliable partner for complex, precision sheet metal parts and assemblies. I. Schechter, Former President of GBI Intralogistics Solutions, Current Owner/President of IPSTEC, Aventura, Florida

Richard Havass

As a customer, I have been working with MJM Manufacturing for approximately 35 years. The expertise of Mike Mijares and his team at MJM is top notch. Whenever I have a new part design, I typically review the design of the part with MJM to ensure that I am using the most cost-efficient manufacturing process to produce the parts as economically as possible. There was a part that we had made years ago using a progressive die to emboss a curved channel into a sheet metal part. The cost of the progressive die for this part was $55K. The redesign of the part from MJM consisted of $1200 in tooling to make the new part profile. Parts came out great and saved tens of thousands in tooling. Lastly, whether MJM produces a prototype or a production run, the appearance of the part is pristine, no tool marks or scratches on any part. In the 35 years that I have worked with Mike and his team, I have found them to be one big family. Mike’s love for his business is refreshing! You rarely see a person that is so charged to get up for work every day! Richard Havass Mechanical Engineering Manager JCI-Sensormatic

Sulen Ojeda Fuentes

Esta fábrica está llena de muy buenos profesionales son una gran familia trabajadores de años con muy buena experiencia .lo recomiendo porque son un gran equipo. Y realizan muy buen trabajo.